How can you pair the TaoTronics Speaker with a mobile device via Bluetooth? What do the LED colors mean? How to use the buttons?
CAUTION: Electrical Device. Read the safety instructions!
Ensure that the TaoTronics TT-SK06 speaker is turned on and the battery fully charged. Do not separate the two devices for more than 3 feet while pairing.
Once switched on, the loudspeaker is automatically set to the pairing mode and can be paired with other Bluetooth enabled devices. The LED flashes rapidly blue.
Turn on the Bluetooth mode on your mobile device. It will automatically search for other Bluetooth enabled devices nearby. Choose the “TaoTronics TT-SK06” device from the list. Has the pairing been successful, the speaker’s LED will stay solid blue and you will hear an acoustic signal. – In case your mobile device requests a password, please try the combination “0000” or “8888“.
In case the speaker and the mobile devices were paired previously, it’s no more required to start pairing again since both devices will repair automatically next time.
In order to perform a “factory reset“, simply press the multi function button for approx 1 second. The speaker is now reset and can be paired with a new device. Do not forget to remove the TaoTronics TT-SK06 speaker from your Bluetooth device list on your mobile device.
In case the speaker is connected to a device via the AUX cable, the Bluetooth function is turned off.
The following functions can be controlled via the four different buttons.
|Function||Button How To / Control|
|Power On||Press and hold the power button for approx 1 second|
|Power Off||Press and hold the power button for approx 1 second|
|Play / Pause||Press the multi function button once|
|Volume Up / Down||Press the volume up (+) / down (-) button|
|Title Next / Previous||Press and hold the volume up (+) / down (-) button for approx 1 second|
|Pick Up Call||Press the multi function button once|
|End Call||Press the multi function button once|
|Reject Call||Press and hold the multi function button for approx 1 second|
|Redial last number||Press and hold the multi function button twice|
The red, blue and orange LED lights on the speaker unit have different meanings.
|LED Status||Speaker Status|
||The battery is fully charged OR speaker is off. Total battery run time is approx 6 hours.|
|LED flashes red
||The battery is almost empty and must be charged.|
|LED solid orange
||The battery is getting charged. A full battery charging cycle is about 4 hours.|
|LED flashes blue rapidly
||The speaker is set to the Bluetooth pairing mode.|
|LED flashes blue slowly
||The speaker is properly connected to a device.|
|LED solid blue
||The speaker set to the music playing mode.|