How can you pair the TaoTronics Mini Speaker with a mobile device via Bluetooth? What do the LED colors mean? How to use the buttons?
 |
Manufacturer: TaoTronics
|
CAUTION: Electrical Device. Read the safety instructions!
Step 1
Turn the TaoTronics Mini (TT-SK03) speaker on by pressing the Power button for approx 2 seconds and ensure that the battery fully charged. Do not separate the two devices for more than 3 feet while pairing.
Step 2
Once switched on, the loudspeaker is automatically set to the pairing mode and can be paired with other Bluetooth enabled devices. The LED flashes rapidly blue.
Step 3
Turn on the Bluetooth mode on your mobile device. It will automatically search for other Bluetooth enabled devices nearby. Choose the “TaoTronics TT-SK03” device from the list. Once the pairing has been successful, the speaker’s LED will stay solid blue and you will hear an acoustic signal. – In case your mobile device requests a password, please try the combination “0000” or “8888“.
Step 4
In case the speaker and the mobile device were paired previously, it’s no more required to start pairing again since both devices will reconnect automatically next time.
Additional Information
The speaker will automatically turn off after 5 minutes of inactivity.
The following functions can be controlled via the different buttons.
| Function | Button How To / Control |
| Power On | Press and hold the power button for approx 2 seconds. |
| Power Off | Press and hold the power button for approx 2 seconds. |
| Play / Pause | Press the play / pause button once. |
| Volume Up / Down | Press and hold the volume up (+) / down (-) button for approx 2 seconds. |
| Title Next / Previous | Press the volume up (+) / down (-) button. |
| Pick Up Call | Press the phone button once. |
| End Call | Press the phone button once |
| Reject Call | Press and hold the phone button for approx 2 seconds. |
The LED lights on the speaker unit have different meanings.
| LED Status | Speaker Status |
| ALL off |
The battery is fully charged OR speaker is off. Total battery runtime is approx 6 hours. |
| LED flashes red |
The battery is almost empty and must be charged. |
| LED solid red |
The battery is getting charged. A full battery charging cycle is about 2 hours. |
| LED flashes blue rapidly |
The speaker is set to the Bluetooth pairing mode. |
| LED flashes blue slowly |
The speaker is properly connected to a device and plays music. |
| LED solid blue |
The connection between the speaker and the device is setup. |
