How can you pair the TaoTronics Rock Speaker with a mobile device via Bluetooth? What do the LED colors mean? How to use the buttons?
Manufacturer: TaoTronics
|
CAUTION: Electrical Device. Read the safety instructions!
Step 1
Ensure that the TaoTronics Rock TT-SK12 speaker is turned on (press Power button for 2 seconds) and the battery fully charged. Do not separate the two devices for more than 3 feet while pairing.
Step 2
Once switched on, the loudspeaker is automatically set to the pairing mode and can be paired with other Bluetooth enabled devices. The LED flashes rapidly red and blue.
Step 3
Turn on the Bluetooth mode on your mobile device. It will automatically search for other Bluetooth enabled devices nearby. Choose the “TaoTronics Rock” device from the list. Has the pairing been successful, the speaker’s LED will stay solid blue and you will hear an acoustic signal. – In case your mobile device requests a password, please try the combination “0000” or “8888“.
Step 4
In case the speaker and the mobile devices were paired previously, it’s no more required to start pairing again since both devices will repair automatically next time. The speaker will not start pairing with another device.
Step 5 (optional)
In order to perform a “factory reset“, simply press the multi function button for approx 3 seconds. The speaker is now reset and can be paired with a new device. Do not forget to remove the TaoTronics Rock speaker from your Bluetooth device list on your mobile device.
Additional Information
In case the speaker is connected to a device via the AUX cable, the Bluetooth function is turned off.
The speaker will automatically turn off after 10 minutes of inactivity (no connection).
The following functions can be controlled via the different buttons.
Function | Button How To / Control |
Power On | Press and hold the power button for approx 2 seconds |
Power Off | Press and hold the power button for approx 2 seconds |
Play / Pause | Press the multi function button once |
Volume Up / Down | Press the volume up (+) / down (-) button |
Title Next / Previous | Press the next / previous button |
Pick Up Call | Press the multi function button once |
End Call | Press the multi function button once |
Reject Call | Press and hold the multi function button for approx 2 seconds |
Redial last number | Press and hold the multi function button twice |
The red and blue LED lights on the speaker unit have different meanings.
LED Status | Speaker Status |
ALL off |
The battery is fully charged OR speaker is off. Total battery run time is approx 24 hours. |
LED flashes red |
The battery is almost empty and must be charged. |
LED solid red |
The battery is getting charged. A full battery charging cycle is about 6 hours. |
LED flashes red and blue |
The speaker is set to the Bluetooth pairing mode. |
LED solid blue |
The speaker is properly connected to a device / connected in AUX mode. |