How can you pair the Anker SoundCore speaker with a mobile device via Bluetooth? What do the different LED colors mean? How to use the buttons?
 |
Manufacturer: Anker
|
CAUTION: Electrical Device. Read the safety instructions!
Step 1
Ensure that the Anker SoundCore speaker* is turned on and the battery fully charged. Do not separate the two devices for more than 3 feet while pairing. Turn on the speaker using the power button on the top.
Step 2
Upon first start, the Anker speaker is automatically set to the pairing mode and the blue LED flashes rapidly. If you have used the speaker before, simply press the Bluetooth button. The speaker is now ready for pairing and can be connected with other Bluetooth enabled devices. – If no device will be connected within 10 minutes, the speaker will automatically turn off.
Step 3
Turn on the Bluetooth mode on your mobile device. It will automatically search for other Bluetooth enabled devices nearby. Select the “Anker SoundCore” device from the list. Has the pairing been successful, the speaker’s LED will stay solid blue. – In case your mobile device requests a password, please try the combination “0000” or “8888“.
Step 4 (optional)
If you want to connect the Anker SoundCore speaker* with another device, simply turn off the Bluetooth function on the first device (for instance “disconnect”) OR press the Bluetooth button on the speaker. The Anker SoundCore will switch back to the pairing mode in order to connect to another device. Follow again the above steps 1 to 3.
Additional Information
The speaker will always try to connect to the last used device (mobile phone, tablet, computer) once powered up. In case a connection cannot be established, the speaker switches back to the pairing mode.
The speaker does not support connecting / pairing with another speaker. However, if you want to run two speakers in parallel, you can manually connect both with a 3.5mm cinch cable (Y-cable).
The following functions can be controlled via the four different buttons.
| Function | Button How To / Control |
| Power On | Press and hold the Power button for approx 2 seconds |
| Power Off | Press and hold the Power button for approx 2 seconds |
| Play / Pause | Press the Play / Pause button once |
| Volume Up / Down | Press the Volume Up (+) / Down (-) button |
| Title Next | Press the Play / Pause button two times |
| Pick Up Call / End Call | Press the Play / Pause button once |
| Reject Call | Press and hold the Play / Pause button for approx 2 seconds |
| Un Pair Connected Device / Start Pairing | Press and hold the Bluetooth button for approx 2 seconds |
| Hold Current Call and Pick Up New Call | Press the Play / Pause button once |
| Switch between 2 Active Calls | Press and hold the Play / Pause button for approx 2 seconds |
The blue and red LED lights have different meanings.
| LED Status | Speaker Status |
| All lights off |
The speaker is turned off OR the battery is fully charged. The total battery runtime is approx 24 hours. |
| LED rapidly flashes blue |
The speaker is set to the pairing mode and ready to connect with a device. |
| LED solid blue |
The speaker is successfully paired with a device. |
| LED flashes red |
The battery level is low. |
| LED solid red |
The battery is charging. A complete charging cycle is approx 5-6 hours. The speaker can be used while charging. |
- CONTAINS 62.5% ETHYL ALCOHOL: A must have for cold to stop the spread of illness causing germs.
- SAFE FOR KIDS: Great bulk hand sanitizer pack for parents and teachers. Pure natural ingredients are gentle enough for children’s sensitive skin, while still killing germs. Great to use at home or in your classroom where cold germs lurk.
- MOISTURIZING & GENTLE ON SENSITIVE SKIN: Pure natural ingredients deeply nourish skin. Free from the harshest synthetic chemicals used on other brands that irritate sensitive skin. Our nutrient:rich hand sanitizer formula includes aloe vera, vitamin E and jojoba oil to leave your skin germ:free and feeling silky smooth.
*Last update on 2020-09-28 / Affiliate links / Images from Amazon Product Advertising API