How can you pair the VAVA earphones with a mobile device via Bluetooth? What do the LED colors mean? How to use the buttons?
CAUTION: Electrical Device. Read the safety instructions!
Ensure that the VAVA Earbuds headphone battery is fully charged. Do not separate the two devices for more than 3 feet while pairing.
Remove the master device from the docking station. Press and hold the multi function button on the master device until the red and white LEDs flash alternatively. The headphone is ready for pairing and can be connected with other Bluetooth enabled devices.
Turn on the Bluetooth mode of your mobile device. It will automatically search for other Bluetooth enabled devices nearby. Choose the “VAVA MOOV 21_R” device from the list. – In case your mobile device requests a password, please try the combination “0000” or “8888“.
Remove the VAVA Earbuds headphone slave device from the docking station and place it close to the master device. Press and hold the multi function button on the master device until the white LED flashes. Both devices will automatically synchronize and connect.
The following functions can be controlled via the buttons.
|Function||Button How To / Control
|Power On||Press and hold both multi function buttons for approx 5 seconds. The LED flashes white.|
|Power Off||Press and hold both multi function buttons for approx 5 seconds. The LED turns red, then turns off.|
|Play / Pause||Press the multi function button once.|
|Volume Up / Down||This function can only be controlled via the device.|
|Skip Next Title||This function can only be controlled via the device.|
|Pick Up Call||Press the multi function button once.|
|End Call||Press the multi function button once.|
|Reject Call||Press and hold the multi function button for approx 2 seconds.|
|Activate Voice Control||Press and hold the multi function button for approx 1 second – not during an active call or music playback.|
The blue green and red LEDs on the headphone / case have different meanings.
|LED Status||Headphone Status|
||The headphone is turned off OR the headphone battery is fully charged. Total headphone battery run-time is approx 3 hours (wearing one earbud) or approx 2 hours (wearing both earbuds).|
|LED flashes red
||The battery is almost empty and must be charged.|
|LED solid white
||The battery is getting charged. A full battery charging cycle is about 3 hours.|
|LED solid red
||The case is getting charged.|
|LED flashes red one time||The headphones were properly added into the case.|
|LED solid blue
||The case battery is fully charged. It can recharge the earbuds approx 3 to 4 times.|
|LEDs flash red and white
||The headphone is pairing with a device.|