How can you pair the TaoTronics TT-BH040 Headphones with a mobile device via Bluetooth? What do the LED colors mean? How to use the buttons?
 |
Manufacturer: TaoTronics
|
CAUTION: Electrical Device. Read the safety instructions!
Step 1
Ensure that the TaoTronics TT-BH040 headphones is turned on and the battery fully charged. Do not separate the two devices for more than 3 feet while pairing.
Step 2
Press and hold the power button on the headset control unit for approx 5 seconds. The LEDs will flash red and blue. The headphones are now ready for pairing and can be connected with other Bluetooth enabled devices.
Step 3
Turn on the Bluetooth mode on your mobile device. It will automatically search for other Bluetooth enabled devices nearby. Choose the “TaoTronics TT-BH040” device from the list. Once the pairing has been successful, the headphone’s LED will flash blue every 3 seconds. – In case your mobile device requests a password, please try the combination “0000” or “8888“.
Additional Information
The following functions can be controlled via the different buttons.
| Function | Button How To / Control |
| Power On | Press and hold the power button. |
| Power Off | Press and hold the power button. |
| Play / Pause | Press the power button once. |
| Volume Up / Down | Press the volume up (+) / down (-) button. |
| Title Next / Previous | Press and hold the volume up (+) / down (-) button for approx 2 seconds. |
| Pick Up Call | Press the power button once. |
| End Call | Press the power button once. |
| Reject Call | Press and hold the power button for approx 2 seconds. |
| Redial | Press the power button twice. |
The blue and red LEDs on the headphone control unit have different meanings.
| LED Status | Headphone Status |
| LED off | The headphone is turned off. |
| LED solid blue |
The battery is fully charged. Total battery runtime is approx 30 hours. |
| LED flashes red |
The battery is almost empty and must be charged. |
| LED solid red |
The battery is getting charged. A full battery charging cycle is about 3 hours. The headphone cannot be used while charging. |
| LED flashes red and blue |
The headphone is set to the Bluetooth pairing mode. |
| LED flashes blue |
The headphone is properly connected to a device. |
