How can you pair the TaoTronics TT-BH15 Headphones with a mobile device via Bluetooth? What do the LED colors mean? How to use the buttons?
CAUTION: Electrical Device. Read the safety instructions!
Ensure that the TaoTronics TT-BH15 headphone is turned on and the battery fully charged. Do not separate the two devices for more than 3 feet while pairing.
Press and hold the multi function button (middle) on the headset control unit for approx 5 seconds. The LEDs will flash red and blue. The headphones are now ready for pairing and can be connected with other Bluetooth enabled devices.
Turn on the Bluetooth mode on your mobile device. It will automatically search for other Bluetooth enabled devices nearby. Choose the “TaoTronics TT-BH15” device from the list. Has the pairing been successful, the headphone’s LED will stay solid blue. – In case your mobile device requests a password, please try the combination “0000” or “8888“.
In case the headphone and the mobile devices were paired previously, you simply have to press the multi function button for approx 3 seconds to automatically pair both devices again.
In order to perform a “factory reset“, simply press the volume up (+) and down (-) buttons simultaneously for a couple of seconds until the purple LED rapidly flashes two times. The headphone is now reset and can be paired with a new device. Do not forget to remove the TaoTronics TT-BH15 headphone from your Bluetooth device list on your mobile device.
The following functions can be controlled via the three different buttons.
|Function||Button How To / Control|
|Power On||Press and hold the multi function button for approx 3 seconds|
|Power Off||Press and hold the multi function button for approx 3 seconds|
|Play / Pause||Press the multi function button once|
|Volume Up / Down||Press the volume up (+) / down (-) button|
|Title Next / Previous||Press and hold the volume up (+) / down (-) button for approx 2 seconds|
|Pick Up Call||Press the multi function button once|
|End Call||Press the multi function button once|
|Reject Call||Press the multi function button twice|
|Activate Voice Control||Press the multi function button twice|
The blue and red LEDs on the headphone control unit have different meanings.
|LED Status||Headphone Status|
||The battery is fully charged OR headphone is off. Total battery runtime is approx 7 hours.|
|LED flashes red
||The battery is almost empty and must be charged.|
|LED solid red
||The battery is getting charged. A full battery charging cycle is about 2 hours.|
|LED flashes red and blue
||The headphone is set to the Bluetooth pairing mode.|
|LED flashes blue 2 times every 5 seconds
||The headphone is properly connected to a device.|
|LED flashes blue 1 time every 3 seconds
||The connection between the headphone and the device got interrupted.|
|LED flashes blue rapidly