How can you pair the TaoTronics TT-BH11 Headphones with a mobile device via Bluetooth? What do the LED colors mean? How to use the buttons?
 |
Manufacturer: TaoTronics
|
CAUTION: Electrical Device. Read the safety instructions!
Step 1
Ensure that the TaoTronics TT-BH11 headphone is turned off and the battery fully charged. Do not separate the two devices for more than 3 feet while pairing.
Step 2
Press and hold the multi function button (middle) on the control panel for approx 5 seconds. The LEDs will flash red and blue. The headphones are now ready for pairing and can be connected with other Bluetooth enabled devices.
Step 3
Turn on the Bluetooth mode on your mobile device. It will automatically search for other Bluetooth enabled devices nearby. Choose the “TaoTronics TT-BH11” device from the list. Has the pairing been successful, the headphone’s LED will flash two times blue every 5 seconds. – In case your mobile device requests a password, please try the combination “0000” or “8888“.
Step 4
In case the headphone and the mobile devices were paired previously, the devices will try to automatically pair next time again.
In order to perform a “factory reset“, simply press the multi function button and the volume down (-) button simultaneously until the purple LED rapidly flashes two times. The headphone is now reset and can be paired with a new device. Do not forget to remove the TaoTronics TT-BH11 headphone headphone from your Bluetooth device list on your mobile device.
Additional Information
The following functions can be controlled via the three different buttons.
| Function | Button How To / Control |
| Power On | Press and hold the multi function button for approx 3 second |
| Power Off | Press and hold the multi function button for approx 3 seconds |
| Play / Pause | Press the multi function button once |
| Volume Up / Down | Press the volume up (+) / down (-) button |
| Title Next / Previous | Press and hold the volume up (+) / down (-) button for approx 2 seconds |
| Pick Up Call | Press the multi function button once |
| End Call | Press the multi function button once |
| Reject Call | Press the multi function button twice |
| Activate Voice Control | Press the multi function button twice |
The blue and red LEDs on the headphone control unit have different meanings.
| LED Status | Headphone Status |
| LED off | The headphone is turned off OR the battery is fully charged. Total battery run-time is approx 6 hours. |
| LED flashes red |
The battery level is very low and the battery must be charged. |
| LED solid red |
The battery is getting charged. A full battery charging cycle is about 2 hours. |
| LED flashes red and blue |
The headphone is set to the Bluetooth pairing mode. |
| LED flashes blue twice every 5 seconds |
The headphone is connected to a device. |
| LED flashes red once every 3 seconds | The headphone got disconnected. |
| LED flashes blue | Incoming call. |
