How can you pair the TaoTronics TT-BH22 Headphones with a mobile device via Bluetooth? What do the LED colors mean? How to use the buttons?
 |
Manufacturer: TaoTronics
|
CAUTION: Electrical Device. Read the safety instructions!
Step 1
Ensure that the TaoTronics TT-BH22 headphones is turned on and the battery fully charged. Do not separate the two devices for more than 3 feet while pairing.
Step 2
Press and hold the multi function button (middle) on the headset control unit for approx 5 seconds. The LEDs will flash red and blue. The headphones are now ready for pairing and can be connected with other Bluetooth enabled devices.
Step 3
Turn on the Bluetooth mode on your mobile device. It will automatically search for other Bluetooth enabled devices nearby. Choose the “TaoTronics TT-BH22” device from the list. Once the pairing has been successful, the headphone’s LED will flash blue. – In case your mobile device requests a password, please try the combination “0000” or “8888“.
Step 4 (optional)
If the headphones and the mobile device were paired previously, both devices will pair again automatically. In order to perform a “factory reset“, simply press the multi function button for a couple of seconds while the headphone is turned OFF until the purple LED rapidly flashes two times. You will also hear two beeps. The headphone is now reset and can be paired with a new device. Do not forget to remove the TaoTronics TT-BH22 headphones from your Bluetooth device list on your mobile device.
Additional Information
The following functions can be controlled via the different buttons.
| Function | Button How To / Control |
| Power On | Switch the Power button to ON |
| Power Off | Switch the Power button to OFF |
| Play / Pause | Press the multi function button once |
| Volume Up / Down | Press the volume up (+) / down (-) button |
| Title Next / Previous | Press and hold the volume up (+) / down (-) button for approx 2 seconds |
| Pick Up Call | Press the multi function button once |
| End Call | Press the multi function button once |
| Reject Call | Press the multi function button twice |
| Activate Voice Control | Press the multi function button twice |
The blue and red LEDs on the headphone control unit have different meanings.
| LED Status | Headphone Status |
| LED off | The headphone is turned off. |
| LED solid blue |
The battery is fully charged. Total battery runtime is approx 25 hours. |
| LED flashes red |
The battery is almost empty and must be charged. |
| LED solid red |
The battery is getting charged. A full battery charging cycle is about 3 hours. The headphone cannot be used while charging. |
| LED flashes red and blue |
The headphone is set to the Bluetooth pairing mode. |
| LED flashes blue |
The headphone is properly connected to a device. |
